熱熔膠包裝紙 不干膠標簽怎樣區分油膠和熱熔膠

熱熔膠帶與鋁箔膠帶的區別用途

概念不同

熱熔膠帶,是指所涂的膠水.分為熱熔膠帶,溶劑型膠帶,硅膠帶和水性膠帶

鋁箔膠帶,是指基材,種類繁多,比如PET,PVC,PE,鋁箔，銅箔等等

一、VHB acrylic膠帶、壓克力膠帶：

材料：丙希酸

厚度：0.2MM~ 3.0MM等

性能：粘著強度高，保持性能好，耐溫優良；起到固定，密封，緩沖等作用。

適用領域：汽車內外裝飾件，電器、手機、電腦、智能鎖等裝飾件及產品內外零部件的固定。幕墻、電梯、門窗、太陽能板等粘。

VHB acrylic tape:

Carriers: Acrylic

Thickness: 0.2MM~ 2.2MM

Performance: highly adhesive, maintain good performance, good temperature resistance; Function on fixed, sealing, buffering and so on.

Applications: automotive interior and exterior decorative parts, electrical appliances, decoration of mobile phones, computers,and fix products components.

二、泡棉雙面膠帶：

材料：PE，PU，EPDM等泡棉+日本進口膠粘劑

厚度：0.15MM~4.0MM等

性能：粘著強度高，保持性能好，耐溫優良；起到固定，密封，緩沖等作用。

適用領域：汽車內外裝飾件，電器、手機、電腦等裝飾件及產品內外零部件的固定,粘式配線固定座。幕墻、電梯、門窗、太陽能板、石墨烯等粘。

Foam double-sided tape:

Carriers: PE, PU, EPDM, and glue importing from Japan

Thickness: 0.15MM~ 4.0MM, etc.

Performance: highly adhesive, maintain good performance, good temperature resistance; Function on fixed, sealing, buffering and so on.

Applications: automotive interior and exterior decorative parts, electrical appliances, decoration of mobile phones, computers,and fix products components.

三、高粘綿紙雙面膠帶：

材料：無紡布（白色，黑色或彩色膠帶）

厚度：0.07MM~0.42MM等，

性能：高粘結強度，性能穩定。耐溫，耐溶劑性能良好。剝離紙可以換剝離膜。有帶離型膜的可以選擇,剝離時不容易斷裂.

適用領域：汽車，電器、手機、電腦,沖浪板等裝飾件及產品內外零部件的固定。

Highly adhesive double-sided tape:

Material: Non-woven(white, black or colored tape)

Thickness: 0.09MM~ 0.42MM

Performance: highly adhesive strength, stable performance. Temperature resistance, solvent good performance.

Application: automotive interior and exterior decorative parts, electrical appliances, decoration of mobile phones, computers,and fix products components.

四、薄膜膠帶：

材料：PET，PVC，PP、TPU、PE等薄膜+日本進口膠粘劑

厚度：0.05MM~1.2MM等

性能:粘著強度高，保持性能好，耐溫優良；起到固定，密封，絕緣,消音等作用。

適用領域：電子標簽，RFID標簽，汽車內外部件，電器、手機、電腦，智能鎖等裝飾件,薄膜開關,面板及產品內外零部件的固定,以及各種硅橡膠材料.低聚能表面.

Film Tape:

Material: PET, PVC, PP, TPU、PEand glue importing from Japan

Thickness: 0.05MM~ 1.2MM

Performance: highly adhesive, maintain good performance, good temperature resistance; Function on fixed, sealing, insulation and muffling and so on.

Applications: automotive interior and exterior decorative parts, electrical appliances, decoration of mobile phones, computers, film switch, board and fix products components.

五、玻璃纖維膠帶：

材料：玻璃纖維網（直條型，井字型，單面或雙面）

厚度：0.12MM~0.23MM

性能：粘著性能強，抗拉性能好，不殘膠，剪切時不變形

適用領域：用于防火條，防火材料，陶瓷纖維，家具，木材，鋼鐵，船舶，機械，電器，電子等行業的重包裝、部件固定、產品定位等。

Glass fiber tape:

Carriers: Glass fiber net(straight bar, well-shaped, single-sided or double-sided)

Thickness: 0.12MM~ 0.23MM

Performance: strong adhesive properties, good resistance tensile strength, non-residue adhesive,not shear deformation.

Applications: used for heavy packaging, components fixed, product positioning on furniture, wood, steel, shipbuilding, machinery, electrical appliances, electronics,,

六、保護膜：

材料：PE，PET，PP

厚度：0.04MM~0.12MM

性能：透明度高，抗刮拉性能好。有高中低粘著強度。剝離后不殘膠，無鬼影。

適用領域：汽車，電器，電子產品生產及銷售過程中表面的保護，部件臨時固定等。

Protective tapes:

Carriers: PE, PET, PP

Thickness: 0.04MM~ 0.12MM

Features: high transparency, anti-scratch pull good performance. There is three grade adhesive including lower, middle and high. No adhesive residue after peeling, no ghosting.

Application: Protecting surface of auto, electrical appliances, electronic products during production and selling, temporary fixation for components.

七、耐高溫美紋紙膠帶：

材料：皺紋紙（各種顏色）

厚度：0.15MM,0.18MM

性能：耐溫度180度,230度.剝離后不殘膠.

適用領域：汽車,電器等部件焊錫遮蔽保護，產品固定

High Temperature Masking Tape:

Carriers: crepe paper(various colors)

Thickness: 0.15MM, 0.18MM

Performance: resistance temperature of 180 degrees, 230 degrees. No adhesive residue after peeling.

Application: masking protection some parts of auto, electrical applicance when soldering tin; product fixed.

八、銅箔,鋁箔膠帶：

材料：銅箔,鋁箔

厚度：0.06MM,0.085MM,0.12MM等

性能：粘著性能好,可以制成導電或不導電的膠帶。

適用領域：適用于電腦,電器,顯示器,變壓器，線纜，管道等部件粘接.包扎?？梢韵姶鸥蓴_EML,隔離電磁波。

Copper foil, aluminum foil tape:

Carriers: copper foil, aluminum foil

Thickness: 0.06MM, 0.085MM, 0.12MM

Performance: Good adhesion properties, can be made conductive or non-conductive tape.

Applications: Suitable for felting or bonding of computers, electrical appliances, monitors, transformers, cables, pipes. Bandaging. It can eliminate electromagnetic interference EML, isolation electromagnetic waves.

九、密封防水膠帶：

材料：丁基膠

厚度：0.8MM~5MM

性能：密封性能優良,耐老化性

適用領域：適用于多種管道焊縫、接頭、三銅、彎頭、死角部位的填補，以利于膠帶的平滑過渡纏繞。建筑,汽車,電器絕緣密封防水等用途

Waterproof sealing tape:

Material: Butyl rubber

Thickness: 0.8MM~ 5MM

Performance: excellent sealing performance, anti-aging

Applications: Suitable for filling a variety of pipeline welds, joints, three copper, elbow, dead parts, in order to facilitate a smooth transition of wound tape. Waterproof sealing on construction, automotive, electrical insulation and others.

十、耐磨潤滑膠帶：

材料：高分子聚乙烯，特富龍

厚度：0.15~0.42MM

性能:自我潤滑性好,耐磨性優良,耐沖擊性,耐藥品性好.

使用領域:各種貼標機,自動售貨機器的滑動面,導軌的保護,墊片保護

wear-resistant lubricating and adhesive tape:

Carriers: macromolecule polyethylene, Teflon

Thickness: 0.15~ 0.42MM

Performance: Self-lubrication is good, excellent abrasion resistance, impact resistance, good chemical resistance.

Applicance: all kinds of labeling machines, the sliding surface of automatic vending device, guide rail protection, gaskets to protect

十一、單面海綿膠帶：

材料：PE，PU，EPDM、PORON、羅杰斯硅橡膠等海綿+日本進口膠粘劑（3M膠帶）

厚度：0.25MM~10MM等

性能:粘著強度高，保持性能好，耐溫優良；起到固定，密封，緩沖,消音，阻燃等作用。

適用領域：汽車內外部件，電器、手機、電腦等裝飾件及產品內外零部件的固定。

Single-sided foam tape:

Material: PE, PU, EPDM, PORONand glue importing from Japan（3M adhesive tape）

Thickness: 0.25MM~ 10MM

Performance: high strength adhesive to maintain good performance, excellent heat resistance; Function on fixed, sealing, cushioning, silencers and so on.

Applications: automotive interior and exterior decorative parts, electrical appliances, decoration of mobile phones, computers,and fix products components.

十一、產品中心：泡棉膠帶系列、VHB壓克力膠帶、高強度雙面膠帶、薄膜膠帶、玻璃纖維膠帶、保護膜膠帶、耐高溫美紋紙膠帶、熱敏膠帶、耐低溫膠帶、單面海綿膠帶、導電導熱阻燃膠帶、密封防水膠帶、耐磨潤滑膠帶、硅橡膠膠帶,功能性膠帶等。以及各種膠粘制品的新品開發和模切加工。We are strong and competitive in the following products: Double foam tape series, VHB acrylic tape, highly adhesive double-sided tape, film tape, glass fibre tape, protection tape, heat-resistant Masking Tape, Security Tape—Tamper Evident, Copper and Aluminum foil tape, single-sided foam tape, Thermal Conductive/Electric Conductive Tapes, waterproof tape, wear-resistant lubricating and adhesive tape. Also including new products development and die-cutting for all kinds of adhesive tapes.()

熱熔膠能粘什么材料

熱熔膠可以粘紙、塑膠、塑料、纖維、皮革等材料。熱熔膠是一種可塑性的粘合劑，在一定溫度范圍內其物理狀態隨溫度改變而改變，而化學特性不變，其無毒無味，屬環保型化學產品。

因熱熔膠本身是固體，便于包裝、運輸、存儲、無溶劑、無污染、無毒型，以及生產工藝簡單，高附加值，黏合強度大、速度快等優點而備受青睞。

熱熔膠的粘性分早期粘性和后期粘性，只有早期粘性和后期粘性一致，才能使熱熔膠與被接著物保持穩定。

熱熔膠對溫度比較敏感，溫度達到一定程度，熱熔膠開始軟化，低于一定溫度，熱熔膠會變脆，所以選擇熱熔膠必須充分考慮到產品所在環境的溫度變化。

不干膠標簽怎樣區分油膠和熱熔膠

油膠是充油膠，干膠是沒充油的！從理論上說所有的SBS都可以用來做TPE，不過具體還是得取決于你想最終需要的性能！水膠一般比較透白，無刺鼻味道；

油膠顏色偏黃，有刺鼻味道；

熱熔膠無毒無味，基本不用在銅板紙上。

熱熔膠設備方面，在選擇熱熔膠機時，要綜合考慮成本和效率。根據速度要求、生產場地、布局合適的熱熔膠設備及熱熔膠管、熱熔膠槍及配套輔助設備，以實現自動化噴膠或半自動化噴膠，進而發揮熱熔膠的優勢來取得最大效果和經濟效益。此方面可向?qū)I(yè)的熱熔膠機廠商咨詢，總的說來，采用全自動或半自動的噴膠方式較手工方式大大發揮出熱熔膠在粘合方面的速度和成本優勢。